Product Details
BB1-1AT provides two M10(3/8″)/M8(5/16″) connection posts with black and red base versions. Its 80 A current rating and stud interface provide a straightforward reference for vehicle wiring suppliers selecting a mounted cable termination point.
BB1-1AT / mixed terminal configuration.
- 01 A defined cable termination point
The 2 x M10(3/8″)/M8(5/16″) stud arrangement provides two defined cable termination positions. This is a connection component, not a battery disconnect switch or a fuse holder. - 02 Match the lug to the stud
The M10(3/8″)/M8(5/16″) interface identifies the required lug-hole fit. Plan the cable approach and access for securing the connection; stud size alone does not define the permitted cable cross-section. - 03 Visible base identification
The black and red base versions provide a visible reference within the wiring assembly. Use consistent labels and polarity conventions throughout the installation.
Specifications
| Model | BB1-1AT |
| Current rating | 80 A |
| Maximum Voltage | 48 V DC |
| Stud terminals | 2 x M10(3/8″)/M8(5/16″) |
| Stud Material | Stainless Steel |
| Color Versions | Black/Red |
Terminal counts refer to one product assembly. Color versions are not added together. Mounting screws are not counted as electrical screw terminals.
Current rating applies to the product, not to each connection. Provide circuit protection separately. Inch sizes are approximate references, not interchangeable thread specifications.
Compare Connection Layouts and Ratings
Compare this model with other connection formats in the DAIERTEK range. Matching terminal counts do not establish mechanical interchangeability.
| Model | Current rating | Stud terminals | Screw terminals | Layout reference |
|---|---|---|---|---|
| BB1-1AT Current Product |
80 A | 2 x M8(5/16″) | 0 | This product |
| BB1-1 | 80 A | 1 x M10(3/8″)/M8(5/16″)/M6(1/4″) | 0 | Single connection post |
| BB1-1A | 80 A | 1 x M10(3/8″)/M8(5/16″)/M6(1/4″) | 0 | Single connection post |
| BB2-1 | 80 A | 2 x M8(5/16″) | 0 | Twin connection posts |
| BB100-T2M5-R | 100 A | 2 x M5(3/16″) | 0 | Stud-only layout |
| BB100-T2M8-B | 100 A | 2 x M8(5/16″) | 0 | Stud-only layout |
Counts are totals for each listed assembly. Dual assemblies are not rated by adding two current values. Black/red options do not mean that a pair is supplied.
Common DC Connections in Practice
Typical uses for protected vehicle and onboard electrical installations.
Vehicle wiring service points
Use the M10(3/8″)/M8(5/16″) connections where a vehicle wiring layout requires two mounted termination positions in a guarded electrical area. Match the mounting location to cable access and service requirements.
Aftermarket wiring assemblies
A connection component for wholesalers supplying vehicle electrical repair and accessory-wiring parts. Specify the connection arrangement required by the installation; the product does not switch or fuse the circuit.
Application examples describe potential installation contexts, not verified fitment to a particular vehicle. Keep live connections protected from water, conductive debris and accidental contact.
Reference Drawing
Request Technical Documents
