Product Details
BB100-T2M8-BR provides 2 x M8(5/16″) stud connections with a 150A current rating. The stud-only layout suits wiring assemblies built around cable lugs, without adding small screw terminals that are unnecessary for that connection format.
BB100-T2M8-BR / mixed terminal configuration.
- 01 A consistent stud interface
2 M8(5/16″) studs give the assembly two defined lug positions. Using one stud diameter makes the mechanical connection format clear when selecting compatible cable lugs. - 02 Access for cable routing
The M8(5/16″) stud layout provides defined positions for locating cable lugs. Account for lug width, cable bend radius and tool access when positioning the assembly inside a protected enclosure. - 03 Straightforward connection planning
The 150A current rating and 2 x M8(5/16″) terminal layout provide separate electrical and mechanical selection references. The current value is not an allowance for each individual stud.
Specifications
| Model | BB100-T2M8-BR |
| Current rating | 150A |
| Maximum Voltage | 300V AC/48V DC |
| Stud terminals | 2 x M8(5/16″) |
| Bus Bar Material | Nickel Plated Copper |
| Stud Material | Stainless Steel |
| Base Material | UL94-VO Rated, Glass Reinforced Thermoplastics |
| Color Versions | Black/Red |
| Overall Dimensions | 106mm x 23mm x 28mm (L x W x H) |
Terminal counts refer to one product assembly. Color versions are not added together. Mounting screws are not counted as electrical screw terminals.
Current rating applies to the product, not to each connection. Provide circuit protection separately. Inch sizes are approximate references, not interchangeable thread specifications.
Compare Connection Layouts and Ratings
Compare this model with other connection formats in the DAIERTEK range. Matching terminal counts do not establish mechanical interchangeability.
| Model | Current rating | Stud terminals | Screw terminals | Layout reference |
|---|---|---|---|---|
| BB100-T2M8-B Current Product |
150A | 2 x M8(5/16″) | 0 | This product |
| BB100-T4M8-C-BR | 150A | 4 x M8(5/16″) | 0 | Stud-only layout |
| BB150-T6M6-C-BR | 150 A | 6 x M6(1/4″) | 0 | Stud-only layout |
| BB200-T6M6-B | 200 A | 6 x M6(1/4″) | 0 | Stud-only layout |
| BB300-T6M10-C-BR | 300 A | 6 x M10(3/8″) | 0 | Stud-only layout |
| BB400-T6M8-C-BR | 400 A | 6 x M8(5/16″) | 0 | Stud-only layout |
Counts are totals for each listed assembly. Dual assemblies are not rated by adding two current values. Black/red options do not mean that a pair is supplied.
Common DC Connections in Practice
Typical uses for protected vehicle and onboard electrical installations.
Off-road accessory wiring
Organize common accessory connections with the 2 x M8(5/16″) stud layout. Locate the bar in a guarded, dry compartment rather than an exposed vehicle area.
RV auxiliary electrical systems
Provide an accessible common connection point within a protected onboard electrical compartment. Plan the connections around the required polarity and provide circuit protection separately.
Application examples describe potential installation contexts, not verified fitment to a particular vehicle. Keep live connections protected from water, conductive debris and accidental contact.
Reference Drawing
Request Technical Documents
