Product Details
BB600-T6M10-C-BR provides 6 x M10(3/8″) stud connections with a 600 A current rating. The stud-only layout suits wiring assemblies built around cable lugs, without adding small screw terminals that are unnecessary for that connection format. Black and red versions share the same connection layout.
BB600-T6M10-C-BR / mixed terminal configuration.
- 01 Six M10(3/8″) lug positions
Six M10(3/8″) studs provide a common connection layout for assemblies using larger lug-hole interfaces. There are no small screw terminals; all six positions use the same stud format. - 02 A covered terminal area
The protective cover helps shield the connection area from incidental contact. Provide sufficient installation clearance for access to the terminals with the power isolated. - 03 A 600 A option in the range
The 600 A current rating distinguishes this model from lower-current six-stud alternatives. Select it against the system load and installation conditions rather than the number of connected cables alone.
Specifications
| Model | BB600-T6M10-C-BR |
| Current rating | 600 A |
| Maximum Voltage | 48 V DC |
| Stud terminals | 6 x M10(3/8″) |
| Bus Bar Material | Nickel Plated Copper |
| Stud Material | Stainless Steel |
| Base Material | UL94-VO Rated, Glass Reinforced Thermoplastics |
| Cover Material | Protective cover |
| Color Versions | Black/Red |
| Overall Dimensions | 178mm x 37.8mm x 56.2mm (L x W x H) |
Terminal counts refer to one product assembly. Color versions are not added together. Mounting screws are not counted as electrical screw terminals.
Current rating applies to the product, not to each connection. Provide circuit protection separately. Inch sizes are approximate references, not interchangeable thread specifications.
Compare Connection Layouts and Ratings
Compare this model with other connection formats in the DAIERTEK range. Matching terminal counts do not establish mechanical interchangeability.
| Model | Current rating | Stud terminals | Screw terminals | Layout reference |
|---|---|---|---|---|
| BB600-T6M10-C-BR Current Product |
600 A | 6 x M10(3/8″) | 0 | This product |
| BB100-T4M8-C-BR | 100 A | 4 x M8(5/16″) | 0 | Stud-only layout |
| BB150-T6M6-C-BR | 150 A | 6 x M6(1/4″) | 0 | Stud-only layout |
| BB200-T6M6-B | 200 A | 6 x M6(1/4″) | 0 | Stud-only layout |
| BB300-T6M10-C-BR | 300 A | 6 x M10(3/8″) | 0 | Stud-only layout |
| BB400-T6M8-C-BR | 400 A | 6 x M8(5/16″) | 0 | Stud-only layout |
Counts are totals for each listed assembly. Dual assemblies are not rated by adding two current values. Black/red options do not mean that a pair is supplied.
Common DC Connections in Practice
Typical uses for protected vehicle and onboard electrical installations.
Auxiliary power compartments
The 6 x M10(3/8″) stud layout provides a connection format for a vehicle auxiliary-power assembly. Assess the cable, overcurrent protection and installation conditions independently of the 600 A product rating.
RV and commercial vehicle electrical builds
Use within a protected electrical compartment where cable lugs need defined connection positions. Leave clearance for cable bends and access to the terminals during maintenance.
Application examples describe potential installation contexts, not verified fitment to a particular vehicle. Keep live connections protected from water, conductive debris and accidental contact.
Reference Drawing
Request Technical Documents
