Product Details
- 01 Accessible remote cable connection
Creates a dedicated battery connection point on a panel or bulkhead, reducing the need to reach the battery directly during approved charging, service or power-connection procedures. - 02 M10 (3/8 in) stud interface
Accepts compatible cable lugs and service clamps designed for the specified stud connection. Lug-hole size, cable cross-section, stack height and tightening torque must be defined in the installation specification. - 03 Color-coded protective cap
Red and black cap options support positive and negative identification and help reduce accidental contact. The cap is a touch-protection feature; environmental sealing must not be assumed without model-specific test evidence.
Specifications
| Model | BCP-1 |
| Product Type | Remote Battery Connection Post |
| Post Configuration | Single Remote Access Point |
| Stud Size | M10 (3/8 in) |
| Nominal Installation Hole | 31 mm |
| Nominal Stud Length | 30 mm |
| Cap Options | Red / Black |
| Mounting | Through-Panel or Bulkhead |
| Protection Function | Protective Cap; No Fuse or Disconnect Function |
Selection note: Treat the terminal, cable, lug, fastener, insulation and circuit-protection arrangement as one system. Verify the controlled drawing and approved technical data before sampling or production.
Compare Models
Compare connection architecture before comparing dimensions. These models serve different functions and are not automatically interchangeable.
| Model | Product Type | Mounting | Connection Architecture |
|---|---|---|---|
| BTP-2M-M8 | M8-to-tapered-post adapter set | Direct to threaded battery terminal | Positive + negative pair |
| BCP-1 Current Product |
Single remote connection post | Through-panel / bulkhead | Single post |
| BCP-1K | Remote post kit with cable leads | Bracket / panel | Positive + negative pair |
| BCP-2 | Covered through-panel connector | Through-panel | Single protected post |
| BCP-3K | Protected remote post kit | Panel / bulkhead / surface | Positive + negative kit |
| BT-21 | Multi-connection battery terminal | Direct to battery post | 12 connection positions |
Use a direct terminal or adapter when the connection starts at the battery. Use a remote post when the battery connection must be brought to an accessible panel or service point.
Applications
Remote charging access
Provide an accessible cable connection where the battery is behind a seat, inside an enclosure or beneath equipment.
Fleet and service vehicles
Locate a clearly identified service post near the maintenance access area while keeping the battery and primary cables protected.
RV, marine and special-purpose equipment
Create a remote positive or negative connection point where space, compartment layout or service procedures make direct battery access impractical.
Application examples describe potential use cases, not verified fitment to a particular vehicle. Confirm polarity, cable size, protection, mounting space, environmental exposure and the approved service procedure before installation.
Technical information for BCP-1
Contact DAIERTEK for the controlled dimension drawing, installation interface, material information, available compliance documentation and sample support. Include the model number, battery or panel interface, cable schedule and target application so the enquiry can be routed correctly.
Request Technical Documents
