Product Details
- 01 Solid zinc alloy conductive block
The one-piece zinc-alloy conductor provides a rigid current path from a 1/0 AWG input to four 4 AWG branch outputs. Each branch cable is secured by its own Allen set screw for orderly routing and service access. All four outputs share the same electrical input and are not electrically isolated. - 02 Transparent ABS protective cover
The transparent ABS cover helps reduce accidental contact with the connection points and keeps the cable terminations visible for inspection. It can be removed for installation and service; environmental sealing is not implied. - 03 Secure mounting base and Allen set screws
The molded base includes predrilled holes for secure installation on a suitable flat panel, amplifier rack or equipment board. Allen hex set screws retain the stripped conductors; cable preparation, tightening torque and strain relief should follow the installation requirements.
Specifications
| Model | DB-04 |
| Product Type | Power Distribution Block |
| Number of Inputs | 1 |
| Number of Outputs | 4 |
| Input Wire Size | 1 x 1/0 AWG |
| Output Wire Size | 4 x 4 AWG |
| Conductive Block Material | Solid Zinc Alloy |
| Cover Material | Transparent ABS |
| Terminal Type | Allen Hex Set Screw |
| Mounting Type | Base Mount (Predrilled Screw Holes) |
| Fuse Protection | Not included |
| Typical Application | Car Audio / 12V Power Distribution |
Input and output counts are totals for each block. Confirm cable gauge and total current draw against your connected load before installation.
This block does not contain fuses. Always protect the main feed and each branch circuit with appropriately rated overcurrent protection and tighten set screws within recommended torque limits.
Compare input / output layouts
Compare this block with other input/output layouts in the DAIERTEK range. Matching wire gauge does not establish mechanical interchangeability.
| Model | Input | Outputs | Type | Layout reference |
|---|---|---|---|---|
| DB-04 Current Product |
1 x 1/0 AWG | 4 x 4 AWG | Power | This product |
| DB-01 | 1 x 4 AWG | 2 x 8 AWG | Power | Distribution block |
| DB-02 | 1 x 1/0 AWG | 2 x 4 AWG | Power | Distribution block |
| DB-03 | 1 x 4 AWG | 4 x 8 AWG | Power | Distribution block |
Counts are totals for each listed block. Internal connection layouts differ between models — confirm the wiring arrangement of the selected block for your circuit. Select the block, cable sizes and protective devices from the total connected load and installation requirements.
Positive power distribution in low-voltage DC systems
Car Audio Amplifier Power Distribution
Route 1 x 1/0 AWG main power connection to 4 x 4 AWG branch connections for amplifiers, powered audio equipment or other compatible DC loads. This reduces stacked battery connections and keeps equipment-rack wiring organized.
Multi-Amplifier Power Distribution
Distribute the common positive feed to 4 separately routed equipment power cables for multi-amplifier or auxiliary DC installations. Passive speakers remain connected to the appropriate amplifier outputs and are not powered through the distribution block.
Auxiliary Equipment Power Distribution
Provide an organized power split for suitable lighting controllers, accessory relays, audio processors and other auxiliary DC equipment. DB-04 is not a fuse holder; select upstream and branch-circuit protection according to cable size and connected load.
Application examples describe potential installation contexts, not verified fitment to a particular vehicle. Confirm the internal connection arrangement of the block for your circuit, protect the feed and branch circuits as required, and confirm cable size, current demand, mounting location and environmental exposure before installation.
Technical information for DB-04
Contact DAIERTEK for product dimensions, 2D/3D CAD drawings (.STEP), terminal hole layout and mounting details needed for your wiring plan. Include the model number so the enquiry is routed to the correct product.
Request Technical Documents
