Three position lighting and direction selection
Two maintained ON positions select alternate contact paths, with OFF in the centre. The SPDT circuit and 4 terminals define this model’s connection arrangement.
Blue dual LEDs with custom direction markings
Two blue LEDs illuminate the L style actuator. The supplied actuator artwork is laser-engraved arrows and turn signal text.
Custom actuator artwork for OEM panels
J, L, X and E actuators can be laser engraved with customer symbols, text and logos. Matching illuminated configurations allow light to pass through the engraved artwork. Select artwork that identifies your equipment controls or brand.
Specifications
| Product Model | DR-A11L24EBL |
|---|---|
| Product Type | Panel rocker switch |
| Switch Function | ON-OFF-ON |
| Circuit Type | SPDT |
| Operation | Two maintained ON positions select alternate contact paths, with OFF in the centre. |
| Terminal Count | 4 |
| Base Style | Type 1 8-position housing |
| Actuator Style | L style curved actuator |
| Illumination | Dual LED |
| LED Colour | Blue |
| Actuator Artwork | Laser-engraved arrows and TURN SIGNAL text |
| Artwork Customization | Laser engraving |
| OEM Options | Custom symbols, text, logos and packaging |
| Supply | Factory OEM and wholesale |
| Electrical Rating | 20A at 12V DC; 10A at 24V DC |
| Panel Cutout | 37.2 × 21.2 mm |
| Electrical Life | 50,000 cycles |
| Mechanical Life | 100,000 cycles |
| Operating Temperature | -40°C to +85°C |
| IP Rating | IP66 |
| Compliance | CE; RoHS |
| OEM LED Colour Options | Red / Blue / Green / White / Orange for J, L, X and E laser-engraved actuators |
Applications
Three position lighting and direction selection
Use for compatible left and right signal controls or alternate accessory control paths with a centre OFF. The switch does not provide a flasher function.
Vehicle and marine control panels
Integrate this switching function into a compatible auxiliary control panel. Use the model terminal diagram for the switch contacts and any LED connections.
Equipment and relay control assemblies
Use a relay or contactor interface where required by the connected load. The actuator legend identifies a command; it does not establish the switch load rating.
OEM and private label product ranges
Source this model with your own artwork and packaging for a branded switch range or repeat panel assembly orders.
Follow the model wiring diagram and select circuit protection to suit the installation. Terminal count includes contacts and any LED connections.
Custom rocker switches direct from DAIERTEK
J, L, X and E actuators can be laser engraved with customer symbols, text and logos. Matching illuminated configurations allow light to pass through the engraved artwork. Other DR-A actuator styles and LED colours are available within this switching-function range. Our factory can discuss the matching electrical configuration, connector or harness requirements and custom packaging for your project.
Request a factory quotation for DR-A11L24EBL
Send the model number, target quantity and required actuator artwork. Include any LED colour, harness and packaging preferences for your OEM enquiry.
