Return to centre two pole command
Both ON positions operate only while held and return to centre OFF when released. The DPDT circuit and 7 terminals define this model’s connection arrangement.
Dual red LEDs and L actuator
Two red LEDs provide actuator illumination. The supplied actuator artwork is unmarked actuator.
Custom actuator artwork for OEM panels
J, L, X and E actuators can be laser engraved with customer symbols, text and logos. Matching illuminated configurations allow light to pass through the engraved artwork. Select artwork that identifies your equipment controls or brand.
Specifications
| Product Model | DR-A12L27GR |
|---|---|
| Product Type | Panel rocker switch |
| Switch Function | (ON)-OFF-(ON) |
| Circuit Type | DPDT |
| Operation | Both ON positions operate only while held and return to centre OFF when released. |
| Terminal Count | 7 |
| Base Style | Type 1 8-position housing |
| Actuator Style | L style curved actuator |
| Illumination | Dual LED |
| LED Colour | Red |
| Actuator Artwork | Unmarked actuator |
| Artwork Customization | Laser engraving |
| OEM Options | Custom symbols, text, logos and packaging |
| Supply | Factory OEM and wholesale |
| Electrical Rating | 20A at 12V DC; 10A at 24V DC |
| Panel Cutout | 37.2 × 21.2 mm |
| Electrical Life | 50,000 cycles |
| Mechanical Life | 100,000 cycles |
| Operating Temperature | -40°C to +85°C |
| IP Rating | IP66 |
| Compliance | CE; RoHS |
| OEM LED Colour Options | Red / Blue / Green / White / Orange for J, L, X and E laser-engraved actuators |
Applications
Return to centre two pole command
Use to command compatible bidirectional relay or controller inputs for actuator, hatch or similar equipment. Release either side to return to OFF.
Vehicle and marine control panels
Integrate this switching function into a compatible auxiliary control panel. Use the model terminal diagram for the switch contacts and any LED connections.
Equipment and relay control assemblies
Use a relay or contactor interface where required by the connected load. The actuator legend identifies a command; it does not establish the switch load rating.
OEM and private label product ranges
Source this model with your own artwork and packaging for a branded switch range or repeat panel assembly orders.
Follow the model wiring diagram and select circuit protection to suit the installation. Terminal count includes contacts and any LED connections.
Custom rocker switches direct from DAIERTEK
J, L, X and E actuators can be laser engraved with customer symbols, text and logos. Matching illuminated configurations allow light to pass through the engraved artwork. Other DR-A actuator styles and LED colours are available within this switching-function range. Our factory can discuss the matching electrical configuration, connector or harness requirements and custom packaging for your project.
Request a factory quotation for DR-A12L27GR
Send the model number, target quantity and required actuator artwork. Include any LED colour, harness and packaging preferences for your OEM enquiry.
