Product Details
- 01 Barrier-type screw terminal interface — 5 independent pairs
Each of the 5 pairs consists of two M4 wire-binding screws connected by a copper conductor. Adjacent pairs share a common insulating barrier and are not electrically connected. Accepts solid or stranded copper wire (0.5 – 2.5 mm2 / 20 – 12 AWG) — strip, insert, and tighten to 1.5 – 1.8 Nm. - 02 ABS insulating body with transparent PVC cover
Body molded from ABS. Transparent PVC cover (79.38 x 29.9 x 16.7 mm overall) fits over the terminal area to help reduce accidental contact with live terminals while keeping terminations visible for inspection. - 03 Panel-mount design with 68.68 mm mounting pitch
Two reinforced mounting flanges with 68.68 mm hole spacing allow screw-fastening to a suitable flat surface (panel, chassis, or equipment board). Overall footprint: 79.38 x 29.9 x 16.7 mm. Numbered position markers assist wiring identification.
Specifications
| Model | TB-2505 |
| Rated Current | 25 A |
| Rated Voltage | 600 V |
| Poles / Positions | 5 Positions (10 Screws) |
| Terminal Screw | M4 |
| Tightening Torque | 1.5 – 1.8 Nm |
| Conductor Material | Copper (Cu) |
| Fastener / Screw Material | Steel (Fe) |
| Housing Material | ABS |
| Dust Cover Material | Transparent PVC |
| Compatible Wire Section | 0.5 – 2.5 mm2 |
| Compatible Wire AWG | 20 – 12 AWG |
| Dimensions | 79.38 x 29.9 x 16.7 mm |
| Hole Pitch | 68.68 mm |
| Mounting Type | Panel Mount (through-hole flanges) |
| Operating Temperature | –40 °C to +110 °C |
Tighten terminal screws to the specified torque. Confirm wire insulation compatibility with your operating voltage and environmental conditions.
Compare current rating and connection capacity across the DAIERTEK range.
Compare TB-2505 with other terminal block series. Matching pole counts do not establish interchangeability.
| Model | Current rating | Positions | Screw size | Wire range | Dimensions (L×W×H) |
|---|---|---|---|---|---|
| TB-2505 Current Product |
25 A | 5 Pos. | M4 | 0.5 – 2.5 mm2 | 79.38 x 29.9 x 16.7 mm |
| TB-1503 | 15 A | 3 Pos. | M3 | 0.5 – 1.5 mm2 | 45.6 x 21.89 x 14.85 mm |
| TB-1506 | 15 A | 6 Pos. | M3 | 0.5 – 1.5 mm2 | 72.0 x 21.89 x 14.85 mm |
| TB-1512 | 15 A | 12 Pos. | M3 | 0.5 – 1.5 mm2 | 124.8 x 21.89 x 14.85 mm |
| TB-2506 | 25 A | 6 Pos. | M4 | 0.5 – 2.5 mm2 | 91.44 x 29.9 x 16.7 mm |
| TBC-603 | 60 A | 3 Pos. | M6 | 0.5 – 10.0 mm2 | 74.7 x 37.7 x 30.0 mm |
| TBC-1006 | 100 A | 6 Pos. | M6 | 0.5 – 25.0 mm2 | 152.1 x 43.4 x 34.4 mm |
Compare the series above. Terminal count and screw size are listed per assembly.
Typical wiring applications
Point-to-Point Wire Termination
Routed as field-wiring terminations inside control panels, junction boxes, and machinery where each screw pair serves a separate circuit leg without bridging.
Control-Panel Circuit Interconnection
5 independent connection points for organizing relay coil wiring, sensor returns, pilot-light circuits, and auxiliary contact wiring inside industrial enclosures.
Harness-to-Panel Connection
Serve as the transition point between cable harness assemblies and fixed equipment wiring in mobile electrical systems (marine helm, RV battery compartments, off-road vehicle dash panels) and stationary automation racks.
Application examples describe common installation contexts. Verify the rated voltage, current, temperature, and environmental conditions match your specific application.
Technical information for TB-2505
Contact DAIERTEK for 2D/3D CAD drawings (.STEP), mounting hole layout, and detailed installation guidelines. Include the model number in your enquiry.
Request Technical Documents
