Product Details
- 01 Three current ratings for the 300 A version
ASW-A705-300A separates continuous load capacity from temporary and engine-starting duty: 300 A continuous, 450 A for 5 minutes and 1,000 A for 30 seconds. These values apply to the 300 A version, not to every model in the series.
- 02 Copper terminals and threaded panel mounting
The 300 A version uses two copper M10 x 1.25 terminal studs and an M52 x 1.5 mounting thread. The rotary knob gives a visible ON-OFF control point while the panel-mount format keeps the switching body behind the mounting surface.
- 03 Control appearance for wholesale and OEM ranges
Red and black knob examples, alternative face icons and removable knob assemblies are shown in the product photographs. Appearance and packaging options can be coordinated for distributor, private-label and vehicle equipment programs.
Specifications
| Model | ASW-A705 Series |
| Product Type | Compact ON-OFF battery disconnect switches |
| Switching Function | ON-OFF |
| Terminal Studs – ASW-A705-300A | 2 x M10 x 1.25; copper |
| Mounting Thread – ASW-A705-300A | M52 x 1.5 |
| Ingress Protection – ASW-A705-300A | IP56 |
| Operating Temperature – ASW-A705-300A | -40 to +80 deg C |
| Control Options | Red or black knob; icon / face options vary by configuration |
| Continuous Current – ASW-A705-50A | 50 A |
| Intermittent Current – ASW-A705-50A | 75 A |
| Cranking Current – ASW-A705-50A | 300 A for 5 seconds |
| Maximum Voltage – ASW-A705-50A | 50 V DC |
| Continuous Current – ASW-A705-100A | 100 A |
| Intermittent Current – ASW-A705-100A | 150 A |
| Cranking Current – ASW-A705-100A | 500 A for 5 seconds |
| Maximum Voltage – ASW-A705-100A | 32 V DC |
| Continuous Current – ASW-A705-200A | 200 A |
| Intermittent Current – ASW-A705-200A | 350 A |
| Cranking Current – ASW-A705-200A | 1,000 A for 5 seconds |
| Maximum Voltage – ASW-A705-200A | 32 V DC |
| Continuous Current – ASW-A705-300A | 300 A |
| Intermittent Current – ASW-A705-300A | 450 A for 5 minutes |
| Cranking Current – ASW-A705-300A | 1,000 A for 30 seconds |
| Maximum Voltage – ASW-A705-300A | 32 V DC |
ASW-A705 Series Model Comparison
Four ON-OFF versions are available within the ASW-A705 series. Compare the models below for your product range or equipment application.
| Model | Continuous | Intermittent | Cranking | Max Voltage |
|---|---|---|---|---|
| ASW-A705-50A | 50 A | 75 A | 300 A / 5 sec | 50 V DC |
| ASW-A705-100A | 100 A | 150 A | 500 A / 5 sec | 32 V DC |
| ASW-A705-200A | 200 A | 350 A | 1,000 A / 5 sec | 32 V DC |
| ASW-A705-300A | 300 A | 450 A | 1,000 A / 30 sec | 32 V DC |
Typical battery-switch applications
Automotive Auxiliary Battery Circuits
Manual isolation for accessory or auxiliary battery feeds for service and storage.
RV, Camper and Utility Vehicle Systems
A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.
Equipment Service Disconnects
Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.
Aftermarket and Private-Label Programs
A repeatable product platform for distributors and qualified OEM projects.
Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.
Technical information for ASW-A705 Series
Contact DAIERTEK for available dimensional drawings, terminal information, operating-life data and packaging options for ASW-A705 Series. Qualified projects may request model marking, logo, control or label treatment, mounting accessories and packaging, subject to technical review and order requirements.
Request Technical Documents
