Three maintained operating selections
Three maintained ON positions select the contact combinations shown in the circuit diagram. There is no OFF position. The DPTT circuit and 8 terminals define this model’s connection arrangement.
White LED and customizable L actuator
One white 12 V LED illuminates the L style actuator. Customer logos, control symbols and text can be laser engraved for an OEM panel design.
Custom actuator artwork for OEM panels
J, L, X and E actuators can be laser engraved with customer symbols, text and logos. Matching illuminated configurations allow light to pass through the engraved artwork. Select artwork that identifies your equipment controls or brand.
Specifications
| Product Model | DR-A12L18HW |
|---|---|
| Product Type | Panel rocker switch |
| Switch Function | ON-ON-ON |
| Circuit Type | DPTT |
| Operation | Three maintained ON positions select the contact combinations shown in the circuit diagram. There is no OFF position. |
| Terminal Count | 8 |
| Base Style | Type 1 8-position housing |
| Actuator Style | L style curved actuator |
| Illumination | Single white 12 V LED |
| LED Colour | White |
| Actuator Artwork | Custom laser-engraved artwork available |
| Artwork Customization | Laser engraving |
| OEM Options | Custom symbols, text, logos and packaging |
| Supply | Factory OEM and wholesale |
| Electrical Rating | 20A at 12V DC; 10A at 24V DC |
| Panel Cutout | 37.2 × 21.2 mm |
| Electrical Life | 50,000 cycles |
| Mechanical Life | 100,000 cycles |
| Operating Temperature | -40°C to +85°C |
| IP Rating | IP66 |
| Compliance | CE; RoHS |
| OEM LED Colour Options | Red / Blue / Green / White / Orange for J, L, X and E laser-engraved actuators |
Applications
Three maintained operating selections
Use for three maintained control selections through a compatible equipment controller. Customer legends can identify the operating modes. The switch is a selector and does not itself regulate speed.
Vehicle and marine control panels
Integrate this switching function into a compatible auxiliary control panel. Use the model terminal diagram for the switch contacts and any LED connections.
Equipment and relay control assemblies
Use a relay or contactor interface where required by the connected load. The actuator legend identifies a command; it does not establish the switch load rating.
OEM and private label product ranges
Source this model with your own artwork and packaging for a branded switch range or repeat panel assembly orders.
Follow the model wiring diagram and select circuit protection to suit the installation. Terminal count includes contacts and any LED connections.
Custom rocker switches direct from DAIERTEK
J, L, X and E actuators can be laser engraved with customer symbols, text and logos. Matching illuminated configurations allow light to pass through the engraved artwork. Other DR-A actuator styles and LED colours are available within this switching-function range. Our factory can discuss the matching electrical configuration, connector or harness requirements and custom packaging for your project.
Request a factory quotation for DR-A12L18HW
Send the model number, target quantity and required actuator artwork. Include any LED colour, harness and packaging preferences for your OEM enquiry.
