Product Details
- 01 Two M10 terminals for battery cable connectionsTwo M10 terminal studs provide the connection points for the incoming and outgoing battery cables. The stud-and-nut arrangement accepts appropriately sized ring terminals and keeps both cable connections accessible behind the mounting surface.
- 02 ON-OFF operation with a removable T-handleThe red T-handle operates the two-terminal ON-OFF circuit and can be removed from the switch body. A tethered cap covers the key opening when the handle is removed, helping keep the cap with the switch during service or storage.
- 03 Round mounting flange and documented electrical performanceThe round flange provides mounting points for a panel or bracket. ASW-A01 is rated at 300 A / 60 V DC, with insulation resistance of at least 100 megohms and operating life of at least 10,000 cycles.
Specifications
| Model | ASW-A01 |
| Product Type | Manual battery disconnect switch |
| Switching Function | ON-OFF |
| Terminal Configuration | 2 Brass terminals |
| Terminal Stud Size | M10 |
| Rated Current / Voltage | 300 A at 60 V DC |
| Actuator | Red removable T-handle |
| Protective Cap | Tethered cap for the key opening |
| Mounting | 22.6mm Round flange; 4xφ5.2 Holes |
| Insulation Resistance | ≥ 100 Ω |
| Dielectric Withstand | ≥ 1,500 V AC for 1 minute |
| Operating Life | ≥ 10,000 cycles |
Typical battery-switch applications
Automotive Auxiliary Battery Circuits
Manual isolation for accessory or auxiliary battery feeds for service and storage.
RV, Camper and Utility Vehicle Systems
A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.
Equipment Service Disconnects
Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.
Aftermarket and Private-Label Programs
A single, defined ASW-A01 product for distributor stocking, vehicle equipment integration and qualified private-label programs.
Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.
Technical information for ASW-A01
Request the ASW-A01 dimensional drawing, installation information or packaging details from DAIERTEK. Model marking, logo and packaging requirements can be reviewed for qualified wholesale and OEM projects.
Request Technical Documents
