bus-bar — Manual Battery Switches — 275 A Rated Current, 300 A Peak Current, M10 Connection Thread

BATTERY DISCONNECT SWITCH / BATTERY MASTER SWITCH / VEHICLE BATTERY CONTROL

ASW-A015 75A M10 ON-OFF Battery Disconnect Switch

DAIERTEK ASW-A015 is a manual ON-OFF battery disconnect switch with a 75 A working current rating for 12 / 24 V DC systems and two copper M10 connection bolts. Its removable operating handle connects or isolates the battery-fed circuit for servicing and storage. The switch is supplied in two accessory configurations: ASW-A015 without the black protective sleeve and retaining chain, or ASW-A015-C with both. The switch specification remains the same; the difference is the supplied sleeve and chain. Mounting-hole centres of 64.8 mm define the fixing interface for vehicle panels or support brackets.

75 A

Working Current

12 / 24 V DC

Operating Voltage

2 x M10

Terminal Studs

ON-OFF

Function

Product documentation

Product Details

01 ON-OFF battery isolation
The manual operating handle connects or disconnects one battery-fed circuit. The switch is rated for 75 A working current in 12 / 24 V DC systems.
02 Copper M10 connections and mounting interface
Two copper M10 connection bolts accept matching cable ring terminals. The mounting-hole centres are 64.8 mm, and the operating temperature range is -30 to +60 deg C.
03 Black sleeve and chain option
ASW-A015 is supplied without the black protective sleeve and retaining chain. ASW-A015-C includes both accessories. The electrical function and switch construction are the same, allowing distributors to stock the required accessory configuration under one product page.

Specifications

Model	ASW-A015
Product Type	Manual battery disconnect switch
Switching Function	ON-OFF
Working Current	75 A
Operating Voltage	12 / 24 V DC
Terminal Studs	2 x M10; copper
Operating Temperature	-30 to +60 deg C
Mounting Hole Centres	64.8 mm
ASW-A015 Accessories	Without black protective sleeve and retaining chain
ASW-A015-C Accessories	With black protective sleeve and retaining chain

Applications for ASW-A015

Bus Bars — 250 A Continuous at 12 V DC, 48 V DC Maximum voltage, 4x M8 Studs per bus bar

Automotive Auxiliary Battery Circuits

Manual isolation for accessory or auxiliary battery feeds for service and storage.

RV, Camper and Utility Vehicle Systems

A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.

Equipment Service Disconnects

Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.

Aftermarket and Private-Label Programs

A repeatable product platform for distributors and qualified OEM projects.

Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.

Related battery control products

Product	Product type	Selection relevance
ASW-A701	275A ON-OFF battery switch	Two M10 copper studs; rotary single-circuit control.
ASW-A701S	275A battery selector	Three M8 brass studs; 1 / 2 / BOTH / OFF selection.
ASW-A705 Series	Compact panel-mount ON-OFF switches	50 A, 100 A, 200 A and 300 A choices.
ASW-A720	600A ON-OFF battery switch	Two M12 studs; larger high-current connection interface.

Alternative manual disconnect, selector and dual-battery control products.

Technical information for ASW-A015

Request dimensional drawings, terminal information and packaging details for ASW-A015. Specify whether the black protective sleeve and retaining chain are required. Logo marking and packaging can be discussed for wholesale and OEM programs.

Request Technical Documents