BATTERY SWITCH / BATTERY DISCONNECT SWITCH / MANUAL POWER ISOLATION

ASW-A02 150A M10 battery switch

DAIERTEK ASW-A02 is a 150 A battery disconnect switch with two M10 terminal studs, a black housing and a red operating handle. The two-terminal arrangement connects an incoming battery feed to the outgoing circuit, with manual control providing a disconnect point for vehicle servicing and storage. The red handle remains easy to distinguish against the black body. ASW-A02 is supplied for automotive aftermarket distributors and vehicle equipment assembly programs. Custom mounting brackets are available to suit the installation layout, providing a mounting interface for securing the switch to a vehicle panel or support structure.

150A

Current Rating

M10

Terminal Studs

Manual battery isolation

Function

2-terminal

Terminals

Product documentation

Product Details

01 Configuration built around the switching requirement
The listed configuration supports Manual battery isolation operation. Buyers can select the appropriate model by circuit function, terminal arrangement, mounting method and electrical rating.
02 Defined terminal and mounting architecture
The product uses 2-terminal with M10 connection sizes.
03 Custom mounting brackets
DAIERTEK can supply a custom mounting bracket for ASW-A02 to suit the required fixing position and installation layout. The bracket provides an attachment interface between the switch and the vehicle panel or support structure. Custom brackets are available on request and are not standard supplied accessories.

Specifications

Model	ASW-A02
Product Type	150A M10 battery switch
Switching Function	Manual battery isolation
Rated Current	150A
Operating Voltage	12-24 V DC
Terminal Configuration	2-terminal
Stud or Connection Size	M10
Mounting	Round flange; 2*6.5MM Hole
Mounting Bracket	Custom bracket available on request; optional accessory

Typical battery-switch applications

Automotive Auxiliary Battery Circuits

Manual isolation for accessory or auxiliary battery feeds for service and storage.

RV, Camper and Utility Vehicle Systems

A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.

Equipment Service Disconnects

Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.

Aftermarket and Private-Label Programs

A repeatable product platform for distributors and qualified OEM projects.

Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.

Related battery-switch products

Product	Product type	Selection relevance
ASW-A701	275A ON-OFF battery switch	Two M10 copper studs; rotary single-circuit control.
ASW-A701S	275A battery selector	Three M8 brass studs; 1 / 2 / BOTH / OFF selection.
ASW-A705 Series	Compact panel-mount ON-OFF switches	50 A, 100 A, 200 A and 300 A choices.
ASW-A720	600A ON-OFF battery switch	Two M12 studs; larger high-current connection interface.

Alternative DAIERTEK battery-switch configurations are shown for selection reference.

Technical information for ASW-A02

Request dimensional drawings, terminal details or packaging information for ASW-A02. For a custom mounting bracket, send the available installation space, fixing-hole layout and switch orientation. Model marking, logo and packaging options can also be discussed for wholesale and OEM programs.

Request Technical Documents