BATTERY SWITCH / BATTERY DISCONNECT SWITCH / MANUAL POWER ISOLATION

ASW-A03 M6 red-knob battery switch

DAIERTEK ASW-A03 is a rotary ON-OFF battery switch with two M6 terminal studs and a red control knob. Its round 59.4 mm flange and 35 mm terminal centre distance define the installation footprint and rear cable connection spacing. Rated at 400 A / 60 V DC, the switch provides manual connection and disconnection of a battery-fed circuit. The compact rotary format suits vehicle accessory assemblies and distributor ranges requiring M6 cable connections.

400 A

Current Rating

12-24 V DC

Operating Voltage

2 x M6

Terminal Studs

ON-OFF

Function

Product documentation

Product Details

01 Configuration built around the switching requirement
The listed configuration supports Manual battery isolation operation. Buyers can select the appropriate model by circuit function, terminal arrangement, mounting method and electrical rating.
02 Defined terminal and mounting architecture
The product uses a model-specific terminal arrangement with M6 connection sizes.
03 Structured for aftermarket and OEM supply
This product supports distributor ranges, replacement programs, equipment integration and qualified private-label projects. Model marking, labels, packaging and selected mechanical details can be reviewed against project requirements.

Specifications

Model	ASW-A03
Product Type	M6 red-knob battery switch
Switching Function	ON OFF
Stud or Connection Size	M6
Rated Current and Voltage	400 A at 60 V DC
Terminal Studs	2 x M6
Flange Diameter	59.4 mm
Terminal Centre Distance	35 mm
Insulation Resistance	> 100 megohms
Dielectric Withstand	>= 1,500 V AC for 1 minute
Operating Life	>= 10,000 cycles

Typical battery-switch applications

Automotive Auxiliary Battery Circuits

Manual isolation for accessory or auxiliary battery feeds for service and storage.

RV, Camper and Utility Vehicle Systems

A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.

Equipment Service Disconnects

Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.

Aftermarket and Private-Label Programs

A repeatable product platform for distributors and qualified OEM projects.

Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.

Related battery-switch products

Product	Product type	Selection relevance
ASW-A701	275A ON-OFF battery switch	Two M10 copper studs; rotary single-circuit control.
ASW-A701S	275A battery selector	Three M8 brass studs; 1 / 2 / BOTH / OFF selection.
ASW-A705 Series	Compact panel-mount ON-OFF switches	50 A, 100 A, 200 A and 300 A choices.
ASW-A720	600A ON-OFF battery switch	Two M12 studs; larger high-current connection interface.

Alternative DAIERTEK battery-switch configurations are shown for selection reference.

Technical information for ASW-A03

Contact DAIERTEK for available dimensional drawings, terminal information, operating-life data and packaging options for ASW-A03. Qualified projects may request model marking, logo, control or label treatment, mounting accessories and packaging, subject to technical review and order requirements.

Request Technical Documents