BATTERY SWITCH / BATTERY DISCONNECT SWITCH / MANUAL POWER ISOLATION

ASW-A05 M10 battery disconnect switch with bracket

DAIERTEK ASW-A05 is a manual battery disconnect switch for 12-24 V DC systems, with a 200 A working current rating and a 1,000 A cranking current rating. It uses M10 terminal studs, a red operating handle and a mounting bracket. The M10 studs accept matching battery cable ring terminals, while the bracket provides a support interface for vehicle panel or equipment-frame installation. Two mounting holes spaced 40 mm apart define the fixing interface. The operating temperature range is -40 to +80 deg C. The switch provides manual battery isolation for vehicle servicing and storage and is supplied for aftermarket wholesalers, replacement-parts distributors and vehicle equipment programs.

200 A

Working Current

1,000 A

Cranking Current

12-24 V DC

Operating Voltage

40 mm / 2 holes

Mounting

Product documentation

Product Details

01 200 A working current and 1000 A cranking current
The switch is specified for 200 A working current and 1,000 A cranking current in 12-24 V DC battery systems. The cranking current rating is separate from the working current rating.
02 Two mounting holes on 40 mm centres
The M10 studs accept matching battery cable ring terminals, while the bracket provides a support interface for vehicle panel or equipment-frame installation. Two mounting holes on 40 mm centres provide the fixing interface.
03 Operating temperature range
The operating temperature range is -40 to +80 deg C. The red handle provides a visible manual control, and the mounting bracket supports installation on a panel or frame.

Specifications

Model	ASW-A05
Product Type	M10 battery disconnect switch with bracket
Switching Function	Manual battery isolation
Stud or Connection Size	M10
Working Current	200 A
Cranking Current	1,000 A
Operating Voltage	12-24 V DC
Operating Temperature	-40 to +80 deg C
Mounting Hole Centres	40 mm
Mounting Holes	2

Typical battery-switch applications

Automotive Auxiliary Battery Circuits

Manual isolation for accessory or auxiliary battery feeds for service and storage.

RV, Camper and Utility Vehicle Systems

A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.

Equipment Service Disconnects

Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.

Aftermarket and Private-Label Programs

A repeatable product platform for distributors and qualified OEM projects.

Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.

Related battery-switch products

Product	Product type	Selection relevance
ASW-A701	275A ON-OFF battery switch	Two M10 copper studs; rotary single-circuit control.
ASW-A701S	275A battery selector	Three M8 brass studs; 1 / 2 / BOTH / OFF selection.
ASW-A705 Series	Compact panel-mount ON-OFF switches	50 A, 100 A, 200 A and 300 A choices.
ASW-A720	600A ON-OFF battery switch	Two M12 studs; larger high-current connection interface.

Alternative DAIERTEK battery-switch configurations are shown for selection reference.

Technical information for ASW-A05

Contact DAIERTEK for available dimensional drawings, terminal information, operating-life data and packaging options for ASW-A05. Qualified projects may request model marking, logo, control or label treatment, mounting accessories and packaging, subject to technical review and order requirements.

Request Technical Documents