ASW-A6006 — Manual Battery Switches — 300 A Continuous Current, 900 A / 30 sec Cranking Current, 48 V DC max Operating Voltage

BATTERY DISCONNECT SWITCH / BATTERY MASTER SWITCH / VEHICLE BATTERY CONTROL

ASW-A6006 300A ON-OFF Battery Disconnect Switch

DAIERTEK ASW-A6006 is a single-circuit battery disconnect switch with ON-OFF operation and 2 M10 terminal studs. It is rated for 300 A continuous current, 500 A intermittent current for 5 minutes and 900 A cranking current for 30 seconds, at a maximum operating voltage of 48 V DC. The rotary knob connects or isolates one battery feed and its load circuit. The red housing provides a compact battery-control interface for automotive aftermarket distributors and vehicle auxiliary-power installations.

300 A

Continuous Current

900 A / 30 sec

Cranking Current

48 V DC max

Operating Voltage

ON-OFF

Function

Product documentation

Product Details

01 Defined continuous and starting ratings
The continuous rating is 300 A. Intermittent capacity is 500 A for 5 minutes, and cranking capacity is 900 A for 30 seconds. Maximum operating voltage is 48 V DC.
02 Dedicated circuit operation
The rotary knob connects or isolates one battery feed and its load circuit.
03 M10 cable connections and rear access
2 M10 studs accept matching cable ring terminals. A rear insulating cover separates the terminal area from surrounding components, while cable-entry openings support routing into the installation.

Specifications

Model	ASW-A6006
Product Type	300A M10 ON-OFF Battery Switch
Contact and Stud Material	Copper
Body Colour	Red
Supplied Fasteners	4 self-tapping screws
Packaging	Individual kraft box
Continuous Current	300 A
Intermittent Current	500 A for 5 minutes
Cranking Current	900 A for 30 seconds
Maximum Operating Voltage	48 V DC
Switching Function	ON-OFF
Terminal Configuration	2 terminals
Terminal Studs	2 x M10
Rear Terminal Cover	Insulating cover
Cable Entry	Cable-routing openings

Applications for ASW-A6006

Bus Bars — 250 A Continuous at 12 V DC, 48 V DC Maximum voltage, 4x M8 Studs per bus bar

Automotive Auxiliary Battery Circuits

Manual isolation for accessory or auxiliary battery feeds for service and storage.

RV, Camper and Utility Vehicle Systems

A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.

Equipment Service Disconnects

Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.

Aftermarket and Private-Label Programs

A repeatable product platform for distributors and qualified OEM projects.

Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.

Related battery control products

Product	Product type	Selection relevance
ASW-A701	275A ON-OFF battery switch	Two M10 copper studs; rotary single-circuit control.
ASW-A701S	275A battery selector	Three M8 brass studs; 1 / 2 / BOTH / OFF selection.
ASW-A705 Series	Compact panel-mount ON-OFF switches	50 A, 100 A, 200 A and 300 A choices.
ASW-A720	600A ON-OFF battery switch	Two M12 studs; larger high-current connection interface.

Alternative manual disconnect, selector and dual-battery control products.

Technical information for ASW-A6006

Request dimensional drawings, terminal details and installation information for ASW-A6006. Logo marking and packaging options are available for wholesale and OEM programs.

Request Technical Documents