BATTERY DISCONNECT SWITCH / BATTERY MASTER SWITCH / VEHICLE BATTERY CONTROL

ASW-A701B 275A ON-OFF Battery Disconnect Switch

DAIERTEK ASW-A701B is a rotary battery disconnect switch with ON-OFF operation and two 3/8-inch terminal studs. It is specified for 275 A working current and 1,250 A cranking current at 12 V DC, over a 12-48 V DC operating range. Current ratings are reduced by 50% at 24 V DC. Its 68 x 68 x 75 mm body defines the installation footprint. The two-terminal layout connects one battery feed to its outgoing load circuit, while OFF isolates that circuit. A black housing and nickel-plated brass studs identify this model. The product is supplied for automotive aftermarket distributors and vehicle auxiliary-power assembly programs.

275 A at 12 V DC

Working Current

1,250 A at 12 V DC

Cranking Current

12-48 V DC

Operating Voltage

2 x 3/8 in

Terminal Studs

Product documentation

Product Details

01 Working and cranking current ratings
The working current is 275 A and the cranking current is 1,250 A at 12 V DC. Apply 50% current derating at 24 V DC. Cranking capacity is separate from the working current rating.
02 Two 3/8 inch terminal studs
The two-terminal layout connects one battery feed to its outgoing load circuit, while OFF isolates that circuit. Two 3/8-inch studs provide attachment points for matching cable ring terminals. A black housing and nickel-plated brass studs identify this model.
03 Compact mounting footprint
The body measures 68 x 68 x 75 mm. Mounting screws and nuts are supplied for panel installation.

Specifications

Model	ASW-A701B
Product Type	Battery disconnect switch
Working Current	275 A at 12 V DC
Cranking Current	1,250 A at 12 V DC
Operating Voltage	12-48 V DC
Current Derating	Current ratings at 24 V DC are 50% of the stated 12 V DC values
Dimensions	68 x 68 x 75 mm
Switching Function	ON-OFF
Terminal Configuration	2 terminals
Terminal Studs	2 x 3/8 in; nickel-plated brass
Body Colour	Black
Supplied Fasteners	Mounting screws and nuts

Applications for ASW-A701B

Automotive Auxiliary Battery Circuits

Manual isolation for accessory or auxiliary battery feeds for service and storage.

RV, Camper and Utility Vehicle Systems

A disconnect point for low-voltage DC systems, installed with suitable cable sizing and circuit protection.

Equipment Service Disconnects

Battery isolation during maintenance, storage or transport when installed in an accessible, protected location.

Aftermarket and Private-Label Programs

A repeatable product platform for distributors and qualified OEM projects.

Install with cable sizes, ring terminals and circuit protection appropriate to the connected load. Short-duration current ratings describe carrying capacity; they do not establish short-circuit protection or permission to disconnect a running engine.

Related battery control products

Product	Product type	Selection relevance
ASW-A701	275A ON-OFF battery switch	Two M10 copper studs; rotary single-circuit control.
ASW-A701S	275A battery selector	Three M8 brass studs; 1 / 2 / BOTH / OFF selection.
ASW-A705 Series	Compact panel-mount ON-OFF switches	50 A, 100 A, 200 A and 300 A choices.
ASW-A720	600A ON-OFF battery switch	Two M12 studs; larger high-current connection interface.

Alternative manual disconnect, selector and dual-battery control products.

Technical information for ASW-A701B

Request dimensional drawings, terminal details and installation information for ASW-A701B. Logo marking and packaging options are available for wholesale and OEM programs.

Request Technical Documents